LEATHER PROTEKT forms an invisible layer of breathable tough bonded nano particles on any leather surface ensuring protection from daily use.
The coating assists in protecting all leather surfaces (natural or artificial) from stains, dirt, color transfers and other contaminants.
The bonded nano particles form a repellant barrier denying oil and liquids to impregnate the surface where applied.
LEATHER PROTEKT aids in the longevity of such surfaces benefiting its users in numerous ways.
SUPER HYDORPHIBIC – ROLL OFF ANGLE LESS THAN 10°
Makes surfaces easy to clean and maintain.
Forms a water and oil repellant barrier on the surface which helps avoid stains and dirt.
Can be applied to all leather surfaces including suede.
APPLICATION
LEATHER PROTEKT as a DIY product easily applied by any individual adhering to the steps mentioned below:
The application area should be clean and dry before applying LEATHER PROTEKT. Shake the product well prior to its use, then either spray directly on to the surface and then use an applicator pad to spread it evenly, or pour onto an applicator pad and apply the product evenly on the area that is to be coated in a horizontal and vertical manner ensuring no portion is left out.
If applying on a large surface area, then it is advised to apply LEATHER PROTEKT section wise. Leave the surface to naturally dry for 12 hours or you may speed up the drying by using a hair dryer.
During application if the product is sprayed on an area outside of the required coverage area, it is recommended to wipe it off immediately using a microfiber towel or terry cloth. Surface is ready to use after drying with a curing time of 12 hours.
Shelf Life: 24 months from production.
Storage: 05 to 35°C
Consumption: 40 sprays per square meter depending on porosity of the surface.
Wide Range of Application Bases.
Household
Automotive
